Filter - TP-Link TD-W8901N User Manual

can access to the modem router. If Deactivated, all IP addresses can access to the modem
router.
IPv6 ACL Rule Index: Select the ACL rule index for the entry.

Active: Enable the ACL rule.

Secure IPv6 Address: Select the IPv6 addresses which are permitted to access to the

modem router remotely.
Application: Select the application for the IPv6 ACL rule, and then you can access the

modem router through it.
Interface: Select the interface for access: LAN, WAN or Both.

IPv6 Access Control of Listing: This displays the information about the IPv6 ACL Rules.


4.5.2 Filter

Choose "Access Management→Filter", you can see the Filter screen (the default is IP/MAC
Filter screen shown in Figure 4-44 ). The filtering feature includes IP/MAC Filter, Application Filter,
and URL Filter. The feature makes it possible for administrators to control user's access to the
Internet, protect the networks.
4.5.2.1 IP Filter
Select IP/MAC Filter as the Filter type, and select IP as the Rule type (shown in Figure 4-44), then
you can configure the filter rules based on IP address. The filtering includes Outgoing and
Incoming, the detailed descriptions are provided below.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide
61