Confirming That The Power Is On - Canon MB2000 series Online Manual

Confirming that the Power Is On

The POWER lamp is lit when the machine is turned on.
Even if the LCD is off, if the POWER lamp is lit, the machine is on.
Note
• It takes about 10 seconds until you can operate the machine after you turn on its power. Wait until the
HOME screen is displayed on the LCD.
• The LCD will turn off if the machine is not operated for about 5 minutes. To restore the display, press
any button except the ON button or perform the print operation. The display will be also restored when
receiving faxes. You cannot change the wait time before the LCD turns off.
146