Advertisement
Top Panel
1
Left Rocker Pedal
1
The default setting for this pedal is for a volume control, but it can be programmed to control any parameter.
Booster Switch
2
Provides a clean boost to the instrument signal path.
Tap Tempo
3
Tapping this switch will allow you to set the tempo of the delay effect. Holding the switch down will activate the
onboard tuner.
LCD Display
4
Displays information about the presets and other parameters.
Looper Controls
5
These two switches allow for recording, playback and overdubbing through the onboard looper.
Right Rocker Pedal
6
The default setting for this pedal is for Wah, but it can be programmed to control multiple parameters.
Model Selectors
7
These four switches allow you to select one of four models within the Preset Bank.
Bank Selectors
8
These two switches allow you to scroll through the Vypyr Pro's Preset Banks.
Preset Selectors
9
These selectors allow easy access to your favorite presets.
3
2
8
7
4
5
9
6
10
Advertisement
