Canon MG3600 series Online Manual page 751

• Other Paper
If the paper corners curl more than 0.1 inch / 3 mm (A) in height, the paper may smudge or may not feed
properly. Follow the instructions below to correct the paper curl.
1. Roll up paper in opposite direction to paper curl as shown below.
2. Check that paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.
Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing.
This may improve the print result.
(C) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
Set printer to prevent paper abrasion.
Check4
Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper. If
you notice abrasion even with the media type set correctly to match the paper, set the machine to prevent paper
abrasion using the operation panel or the computer.
This may reduce the print speed.
* Once you have finished printing, undo this setting. Otherwise, it will apply to subsequent print jobs.
• From operation panel
Press and hold the Stop button until the Alarm lamp flashes 11 times, release the button, and then press
the Color button to enable the Prevent paper abrasion function.
To disable the Prevent paper abrasion function, press and hold the Stop button until the Alarm lamp
flashes 11 times, release the button, and then press the Black button.
• From computer
◦ For Windows:
Open the printer driver setup window, select Custom Settings in Maintenance sheet, select the
Prevent paper abrasion check box, and then click OK.
751