Standard Signal Mode Table - Samsung S19E200NY User Manual

10
Specifications

10.7 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture

quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.

If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
Model
Name
S19E200NY
S19E200NW /
S19E200BW
S19E200BR
S22E200BW
S22E200NY /
S22E200N /
S22E200B /
S23E200B /
S24E200BL
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
Synchronization
Horizontal Vertical
Frequency Frequency
30 – 81 kHz 56 – 75 Hz
30 – 81 kHz 56 – 75 Hz
30 – 81 kHz 56 – 75 Hz
30 – 81 kHz 56 – 75 Hz
30 – 81 kHz 56 – 75 Hz
Resolution
Optimum Resolution
1366 x 768 @ 60 Hz
1440 x 900 @ 60 Hz
1280 x 1024 @ 60 Hz
1680 x 1050 @ 60 Hz
1920 x 1080 @ 60 Hz
Maximum Resolution
1366 x 768 @ 60 Hz
1440 x 900 @ 75 Hz
1280 x 1024 @ 75 Hz
1680 x 1050 @ 60 Hz
1920 x 1080 @ 60 Hz
84
10 Specifications