Lan Host - TP-Link TD-W9970 User Manual

TD-W9970
In the Protocol field, here are four options, All, TCP, UDP, and ICMP. Select one of them
9.
from the drop-down list for the target.
10. Click the Save button.

4.15.2 LAN Host

Choose menu "Firewall" → "LAN Host", and then you can view and set a Host list in the screen
as shown in Figure 4-80.
Description: Here displays the description of the host and this description is unique.

Address Info: Here displays the information about the host. It can be IP or MAC.

Edit: To modify an existing entry.

To add a new entry, please follow the steps below.
1. Click the Add New button.
In the Mode field, select IP Address or MAC Address.
2.
If you select IP Address, please follow the steps below:

1) In Description field, create a unique description for the host (e.g. Host_1).
2) In IP Address field, enter the IP address.
If you select MAC Address, please follow the steps below:

1) In Description field, create a unique description for the host (e.g. Host_1).
2) In MAC Address field, enter the MAC address.
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-79
Figure 4-80
86