EverFocus EMW330 Operation Manual

Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of corrosive
materials may result in equipment failure or other damage.
3. Try and avoid facing the camera toward the sun. In some circumstances, direct sunlight may cause
permanent damage to the sensor and/or internal circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands. Touching a wet power cord with the hands or touching the power cord with wet hands may
result in electric shock.
5. Cleaning Use a damp soft cloth to remove any dirt from the camera
the covers over the lens and IR emitters. Use lens tissue or a cotton tipped applicator and ethanol if it
becomes necessary to clean the camera lens. Please do not use complex solvents, corrosive or
abrasive agents for cleaning.
6. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within -40º C ~ 60º C (-40F~140F) . The input power source is 12VDC.
EMW330 Dual Viewing Position
EMW330T Varifocal AI Lens
Mobile IR Wedge Cameras
Operation Instructions
body, being careful not to scratch