Dodge Dart 2014 Owner's Manual page 431

MESSAGE
SERVICE SHIFTER
ENGAGE PARK BRAKE
Transmission Limp Home Mode
Transmission function is monitored electronically for
abnormal conditions. If a condition is detected that could
result in transmission damage, Transmission Limp Home
Mode is activated. In this mode, some gears will be
unavailable. The transmission will operate only in a
certain select set of gears (such as 1st, 2nd, 3rd, and
Reverse, or 1st, 3rd, 5th, and Reverse, or 2nd, 4th, and 6th
[with no Reverse]). PARK and NEUTRAL will continue
to be available. The Malfunction Indicator Light (MIL)
may be illuminated. Limp Home Mode allows the vehicle
to be driven to an authorized dealer for service without
damaging the transmission.
A shift lever fault has been detected. See your authorized dealer for diagnosis and
The sensor that confirms PARK engagement is not functioning properly. Engage
the parking brake to ensure that the vehicle will not roll when in PARK.
DESCRIPTION
service.
In the event of a momentary problem, the transmission
can be reset to regain all forward gears by performing the
following steps:
1. Stop the vehicle.
2. Shift the transmission into PARK.
3. Turn the ignition switch to the OFF position.
4. Wait approximately 10 seconds.
5. Restart the engine.
STARTING AND OPERATING 429
5