Personal Settings (Customer-Programmable Features) - Fiat 500 abarth 2014 Owner's Manual

Personal Settings (Customer-Programmable
Features)
Dimmer
The EVIC display is provided with a light sensor capable
of detecting environmental light conditions and adjust-
ing the brightness of the instruments accordingly.
NOTE: The brightness of the instrument panel may
change while travelling following an event that causes
switching from "day" to "night" conditions (or vice
versa) in the passenger compartment (e.g. in a tunnel, on
avenues in shadows, under bridges, etc.).
To adjust the brightness, proceed as follows:
1. Press the UP or DOWN
required brightness level.
2. Briefly press the MENU button to go back to the menu
screen or press and hold the MENU (approximately
one second) to go back to the main screen without
storing settings.
Speed Beep (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h) to immediately alert the driver when the
set limit is exceeded.
To set the speed limit, proceed as follows:
1. Briefly press the MENU button. The display will show
the message (Speed Beep).
2. Press the UP
button to set the limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly press the
MENU button to display the presently set activation
UNDERSTANDING YOUR INSTRUMENT PANEL 163
or DOWN button to select speed
4