Personal Settings (Customer-Programmable Features) - Fiat 2015 500 Owner's Manual

168 UNDERSTANDING YOUR INSTRUMENT PANEL

Personal Settings (Customer-Programmable Features)

Dimmer
The EVIC display is provided with a light sensor capable
of detecting environmental light conditions and adjust-
ing the brightness of the instruments accordingly.
NOTE: The brightness of the instrument panel may change
while travelling following an event that causes switching
from "day" to "night" conditions (or vice versa) in the
passenger compartment (e.g. in a tunnel, on avenues in
shadows, under bridges, etc.).
To adjust the brightness, proceed as follows:
1. Push and release the UP
set the required brightness level.
2. Briefly push and release the MENU button to go back to
the menu screen or push and hold the MENU (approxi-
mately one second) to go back to the main screen
without storing settings.
or DOWN button to
I n f o r ma t i o n P r o v i d e d b y :
Speed Beep (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h) to immediately alert the driver when the
set limit is exceeded.
To set the speed limit, proceed as follows:
1. Briefly push and release the MENU button to enter the
Main MENU.
2. Push and release the UP
select Speed Beep. Push and release the MENU
button, push and release the UP
buttons to select Speed Limit activation (On) or
deactivation (Off).
3. When the function is activated (On), briefly push and
release the MENU button to display the presently set
activation speed. Pushing the UP
buttons selects the speed limit. Push and release
the MENU button to confirm selection.
or DOWN button to
or DOWN
or DOWN