Using [Link To Cell] With A Wireless Access Point Connection - Panasonic HC-W570 Owner's Manual

Using [Link to Cell] with a wireless access point connection

∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to on.
1
Connect the smartphone to a wireless access point.
≥ When you connect using NFC for the first time, please make connection of this unit and a
wireless access point.
2
Start up the smartphone application "Image App".
3
Touch the smartphone on
≥ Touch the NFC touch area when the NFC mark is displayed on
the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
≥ If the unit is not recognized even when touching the smartphone,
change positions and try again.
≥ The connection cannot be established while this unit is recording.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
≥ This unit is turned on even if it touches the smartphone on
turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
∫ If the device is Android (non-NFC-compatible) or iOS
1
Connect the smartphone to a wireless access point.
2
Press Wi-Fi button on this unit and touch [Link to Cell].
≥ It will go into connection standby for remote operation.
3
Start up the smartphone application "Image App".
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Link to Cell]:
Touch [EXIT] or press Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
≥ After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on
with the power button, this unit will not turn on by touching the smartphone on
≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted.
j Touching an NFC-compatible smartphone on this unit.
j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone directly.
(l 156)
of this unit.
of this unit again.
of this unit, where this unit is
of this unit. (If you have turned off this unit
- 128 -
of this unit)