Panasonic HC-W570 Owner's Manual page 106

2
Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Video 2] channel with a Composite video cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3
Change the mode to
≥ When this unit and the TV are connected with the HDMI mini cable (supplied) or a Composite
video cable (commercially-available) in any of the following situations, no image will be displayed
on the TV. Use LCD monitor of this unit.
j When recording a motion picture or using PRE-REC with [Backup for Twin Camera] set to
[ON].
j When saving the Highlight Playback scene or a manually edited scene
j When copying/performing [CONVERT TO MP4]
≥ If you connect this unit to the TV when this unit is set to Recording Mode, a squealing sound
be output. Before connecting this unit, set it to Playback Mode.
* The microphone may pick up the sound from the speakers, producing an abnormal sound.
≥ When connected to the TV, sound in Playback Mode is not output from this unit. Also, since the
volume cannot be adjusted with this unit, adjust the volume of the TV.
≥ Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
≥ Image and audio is not output from this unit while using the Wi-Fi function.
to play back.
- 106 -
*
may