Battery Cable - HP ProBook 4740s Maintenance And Service Manual

Battery cable

The battery cable is included in the Cable Kit, spare part number 684633-001.
Before removing the battery cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Hard drive (see
c. Optical drive (see
d. WLAN/Bluetooth module (see
e. Keyboard (see
f. Top cover (see
g. Fan (see
Remove the battery cable:
1. Position the computer upright and open as far as possible.
2. Disconnect the cable from the system board connector (1).
3. Remove the two Phillips PM2.0×4.0 screws that secure the battery cable to the computer (2).
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
WLAN/Bluetooth combo card on page
Keyboard on page
Top cover on page
Fan on page 64)
40).
41).
45)
43)
52)
54)
Component replacement procedures
50)
69