Initializing The Receiver - Ezstart - Magellan GPS 310 User Manual

The GPS 310 is designed to fit
comfortably in your hand. Hold
the receiver with the antenna
towards the sky.

Initializing the Receiver - EZStart

Before using your GPS 310 for the first time, the receiver
needs to know its approximate location. Using Magellan's
EZStart procedure, the GPS 310 will prompt you for the
information it requires when you turn it on for the first time.
You do not need to initialize your receiver each time you use
it. Follow these steps to initialize the GPS 310 if this is the
first time you are using it.
Press to turn the GPS 310 on.
PWR
SELECT REGION. Use the ARROW pad to change the
flashing text to select the appropriate region for your
present location. Press
SELECT COUNTRY or STATE. Use the ARROW pad
to change the flashing text to select the country or state for
your present location.
Press
ENTER
4
ENTER