Setting Tone Options; Setting Text-To-Speech Use; Viewing Technical Gps Information - Magellan MAESTRO 5310 User Manual

Tap Stop to end simulating the current route you are simulating.
(The Simulate button is presently not active.)
4. Tap Back arrow to record the changes and exit.

Setting Tone Options

Provides a way of selecting the tone used to announce arrival at a maneuver or destination.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Tone Options.
3. Select Bell, Chime or Beep.
4. Tap Save to record the changes and exit.

Setting Text-To-Speech Use

1. From page 2 of the Main Menu, tap User Options.
2. Tap Navigation Instruction.
3. Tap "Announce street name" or "Announce exit ramp name" to select when text-to-speech
will be used to indicate maneuvers.
4. Tap Save to record the changes and exit.

Viewing Technical GPS Information

This screen provides technical information about the satellites being used to compute the GPS
position.
1. From page 2 of the Main Menu, tap User Options.
2. Tap GPS Options.
3. Tap GPS Status.
PRN: pseudo random number that identifies
the satellite
AZ: Azimuth of the satellite
EL: Satellite elevation
SNR: Satellite signal-to-noise ratio
TTFF: Time to First Fix (in seconds)
4. Tap Back arrow to exit.
User Options 64