Canon PowerShot SX410 IS User Manual page 215

ç Contents
Shots look grainy.
Lower the ISO speed ( = 102).
●
Subjects are affected by red-eye.
Set [Red-Eye Lamp] to [On] ( = 80) to activate the red-eye reduction
●
lamp ( = 4) in flash shots. Note that while the red-eye reduction lamp
is on (for about one second), it is not possible to shoot, because the
lamp is counteracting red-eye. For best results, have subjects look at the
red-eye reduction lamp. Also try increasing the lighting in indoor scenes
and shooting at closer range.
Edit images using red-eye correction ( = 158).
●
Recording to the memory card takes too long, or continuous
shooting is slower.
Use the camera to perform low-level formatting of the memory card ( = 171).
●
Shooting settings or FUNC. menu settings are not available.
● Available setting items vary by shooting mode. Refer to "Functions
Available in Each Shooting Mode", "FUNC. Menu", and "Shooting Tab"
( = 225 – = 230).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card
that supports high-speed recording. Note that even if the elapsed
time display is incorrect, the length of movies on the memory card
corresponds to the actual recording time ( = 170, = 242).
[ ] is displayed and shooting stops automatically.
● The camera's internal memory buffer filled up as the camera could not record
to the memory card quickly enough. Try one of the following measures.
- Use the camera to perform low-level formatting of the memory card
( = 171).
Lower the image quality ( = 74).
-
Switch to a memory card that supports high-speed recording ( = 242).
-
Downloaded From camera-usermanual.com Canon Manuals
215