Canon PowerShot SX410 IS User Manual page 213

ç Contents
Display on a TV
Camera images look distorted or not displayed on a TV ( = 182).
Shooting
Cannot shoot.
In Playback mode ( = 123), press the shutter button halfway ( = 45).
●
Strange display on the screen under low light ( = 46).
Strange display on the screen when shooting.
● Note that the following display problems are not recorded in still images
but are recorded in movies.
- The screen may darken under bright light.
- The screen may flicker under fluorescent or LED lighting.
- Purplish banding may appear on the screen if you compose a shot
that includes a bright light source.
No date stamp is added to images.
● Configure the [Date Stamp
are not added to images automatically, merely because you have
configured the [Date/Time] setting ( = 69).
Date stamps are not added in shooting modes ( = 230) in which this
●
setting cannot be configured ( = 69).
[ ] flashes on the screen when the shutter button is pressed, and
shooting is not possible ( = 58).
[ ] is displayed when the shutter button is pressed halfway ( = 58).
Set [IS Mode] to [Continuous] ( = 121).
●
Raise the flash and set the flash mode to [ ] ( = 117).
●
Increase the ISO speed ( = 102).
●
● Mount the camera on a tripod or take other measures to keep it still.
Additionally, you should set [IS Mode] to [Off] when using a tripod or
other means to secure the camera ( = 121).
Downloaded From camera-usermanual.com Canon Manuals
] setting ( = 31). Note that date stamps
213