GMC Yukon XL 2015 Owner's Manual page 22

Windshield Wiper/Washer
The windshield wiper control is on
the turn signal lever.
The windshield wipers are controlled
by turning the band with
FRONT on it.
1
: Fast wipes.
w
: Slow wipes.
3 z
INT: Turn the FRONT band
up for more frequent wipes or down
for less frequent wipes.
OFF: Turns the windshield
wipers off.
8
: For a single wipe, turn to
then release. For several wipes,
8
hold the band on longer.
L
: Push the paddle at the top of
the lever to spray washer fluid on
the windshield.
Rainsense
With Rainsense, a sensor near the
top center of the windshield detects
the amount of water on the
windshield and controls the
frequency of the windshield wiper.
3
INT: Turn the
band on the wiper lever to adjust the
z
sensitivity.
Turn the band up for more
sensitivity to moisture.
Turn the band down for less
8
,
sensitivity to moisture.
Move the band out of the
position to deactivate Rainsense.
z
Rainsense on or off. When turned
on and
Rainsense wipe sensitivity
positions, the wipers can be
adjusted for more or less sensitivity
to moisture. When turned off, the
wipers operate as timed intermittent
wipers and can be adjusted for
more or less frequent wipes. A DIC
z message may be displayed when
FRONT
Rainsense is turned on or off.
See Windshield Wiper/Washer on
page 5-3.
3
INT
In Brief
AUTO: Press to turn
z
FRONT is in one of the
1-15