Step 3: Sessioning To The Aip Ssm And Running Setup - Cisco ASA 5510 Quick Start Manual

hostname(config-cmap)# match access-list IPS
hostname(config-cmap)# policy-map my-ids-policy
hostname(config-pmap)# class my-ips-class
hostname(config-pmap-c)# ips promiscuous fail-close
hostname(config-pmap-c)# service-policy my-ips-policy global

Step 3: Sessioning to the AIP SSM and Running Setup

After you have completed configuration of the ASA 5500 series adaptive security appliance to divert
traffic to the AIP SSM, session to the AIP SSM and run the setup utility for initial configuration.
You can either session to the AIP SSM from the adaptive security appliance (by using the
Note
session 1 command) or you can connect directly to the AIP SSM using SSH or Telnet on its
management interface. Alternatively, you can use ASDM.
To session to the AIP SSM from the adaptive security appliance, perform the following steps:
Enter the session 1 command to session from the ASA 5500 series adaptive security appliance
Step 1
to the AIP SSM.
hostname# session 1
Opening command session with slot 1.
Connected to slot 1. Escape character sequence is 'CTRL-^X'.
Enter the username and password. The default username and password are both cisco.
Step 2
The first time you log in to the AIP SSM you are prompted to change the default
Note
password. Passwords must be at least eight characters long and not a dictionary word.
login: cisco
Password:
Last login: Fri Sep
***NOTICE***
This product contains cryptographic features and is subject to United States and
local country laws governing import, export, transfer and use. Delivery of Cisco
cryptographic products does not imply third-party authority to import, export,
distribute or use encryption. Importers, exporters, distributors and users are
responsible for compliance with U.S. and local country laws. By using this product
you agree to comply with applicable laws and regulations. If you are unable to
comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
50
2 06:21:20 from xxx.xxx.xxx.xxx