Fiat 500 Abarth 2015 User Manual page 72

Hide thumbs Also See for 500 Abarth 2015:
Table of Contents

Advertisement

WHAT TO DO IN EMERGENCIES
Jump-Starting Procedure
1. Connect the positive (+) end of the jumper cable to the positive (+) post of the
vehicle with the discharged battery.
2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post
of the booster battery.
3. Connect the negative end (-) of the jumper cable to the negative (-) post of the
booster battery.
4. Connect the opposite end of the negative (-) jumper cable to a good engine
ground (exposed metal part of the discharged vehicles engine) away from the
battery and the fuel injection system.
5. Start the engine in the vehicle that has the booster battery, let the engine idle a
few minutes, and then start the engine in the vehicle with the discharged battery.
Once the engine is started, remove the jumper cables in the reverse sequence:
1. Disconnect the negative (-) jumper cable from the engine ground (-) of the ve-
hicle with the discharged battery.
2. Disconnect the negative end (-) of the jumper cable from the negative (-) post of
the booster battery.
3. Disconnect the opposite end of the positive (+) jumper cable from the positive
(+) post of the booster battery.
4. Disconnect the positive (+) end of the jumper cable from the positive (+) post of
the vehicle with the discharged battery.
• If frequent jump-starting is required to start your vehicle, you should have the bat-
tery and charging system inspected at your authorized dealer.
• Accessories that can be plugged into the vehicle power outlets draw power
from the vehicle's battery, even when not in use (i.e., cellular phones, etc.).
Eventually, if plugged in long enough, the vehicle's battery will discharge suf-
ficiently to degrade battery life and/or prevent the engine from starting.
• Do not use a portable battery booster pack or any other booster source with
a system voltage greater than 12 Volts or damage to the battery, starter mo-
tor, alternator or electrical system may occur.
• Failure to follow these procedures could result in damage to the charging
system of the booster vehicle or the discharged vehicle.
70
CAUTION!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents