Fiat 500 ABARTH 2015 Owner's Manual page 172

170 UNDERSTANDING YOUR INSTRUMENT PANEL
2. Briefly push and release the MENU button to go back
to the menu screen or push and hold the MENU
(approximately one second) to go back to the main
screen without storing settings.
Speed Beep (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h) to immediately alert the driver when the
set limit is exceeded.
To set the speed limit, proceed as follows:
1. Briefly push and release the MENU button to enter the
Main MENU.
2. Push and release the UP
select Speed Beep. Push and release the MENU
button, push and release the UP
buttons to select Speed Limit activation (On) or
deactivation (Off).
or DOWN button to
or DOWN
3. When the function is activated (On), briefly push and
release the MENU button to display the presently set
activation speed. Pushing the UP
buttons selects the speed limit. Push and release
the MENU button to confirm selection.
NOTE: The setting can be increased or decreased by
5 mph or km/h each time the UP/DOWN button is
pushed for speed settings above 20 mph (32 km/h). To
increase or decrease the set speed rapidly, push and hold
the UP/DOWN button. Save the setting by briefly push-
ing the button when you approach the required setting.
• Briefly push and release the MENU button to go back
to the menu screen, or push and hold the MENU
button (approximately one second) to go back to the
main screen without storing the settings.
or DOWN