Pioneer DVR-520H-S Service Manual page 97

5
Table 1: Key operations in Specific Channel Setting mode
QQ
(effective only during recording/playback stop)
3 7 63 1515 0
Key
DIG/ANA
INPUT SELECT,
CHANNEL +/–
(∗R)
[SIDE A], [SIDE B]
[Rev ×3], [×3 Fwd]
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
[Rev SCAN],
[SCAN Fwd]
[Rev STILL STEP],
[STILL STEP Fwd]
[SPEED +], [SPEED -] HD Err Det
TE
L 13942296513
PLAY
CLEAR
PAUSE
ESC
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
www
.
5
http://www.xiaoyu163.com
6
Operation
Switches cyclically between General
Setting mode and Specific Channel
Setting mode.
Switches inputs or channels.
Sets Sync AGC.
Sets Threshold level.
Sets Threshold level.
Sets V-Sync Det.
Sets Std Det.
All channels assigned to have specific
settings are canceled, and the
specific settings are reset to their
default values.
Initializes the setting of Specific
Channel Setting mode.
The specific-setting data for the
currently selected channel are reset
to their default values.
(But the assignment of a channel
having specific settings is not
canceled.)
Exits AVIO setting for specific areas,
clearing the OSD.
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Setting (∗: Default)
–
–
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
• Normal:
The value is fixed, with no display of
the value.
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
Normal (∗) / Short / Long
Normal (∗) / Non STD
Normal (∗) / Fast / Stop
Q Q
3 6 7 1 3 1 5
–
–
–
–
co
.
DVR-520H-S
7
8
9 4 2 8
Remarks
–
–
–
–
–
–
–
–
–
–
–
–
0 5 8 2 9 9 4 2 8
Settings of General Setting mode
are not affected.
Pressing the key resets the settings
of Specific Channel Setting mode
for that channel to the initial values.
Settings of General Setting mode
are not affected.
Settings of General Setting mode
are not affected (retained).
–
m
9 9
A
B
C
9 9
D
E
F
97
8