Draytek Vigor2960 Series User Manual page 424

H a r d w
H a r d w
While the router is running (ACT LED blinking), press the Factory Reset button and hold
for more than 5 seconds. When you see the ACT LED blinks rapidly, please release the
button. Then, the router will restart with the default configuration.
After restore the factory default setting, you can configure the settings for the router again to
fit your personal request.
5 . 6 C o n t a c t i n
5 . 6 C o n t a c t i n
If the router settings are correct at all, and the router still does not connect to internet, please
contact Draytek to help you for configuration.
Also, if the router still cannot work correctly, please contact DrayTek for help. For any
further questions, please send e-mail to support@draytek.com.
a r e R e s e t
a r e R e s e t
g D r a y T e k
g D r a y T e k
416
Vigor2960 Series User's Guide