Installation Stacking - Samsung DV9 series User Manual

INSTALLATION STACKING

If you wish to purchase a stacking kit, please contact our Samsung service center or local distributers.
[Part no. SK-DH / SK-DA / SKK-DF]
Please do not use the product for 1 hour after installing the stacking kit, as you must wait for the oil in
the compressor to become stable after tilting the dryer during installation.
1. Carefully lay the dryer on its side. Use the packing material so
you don't scratch the fi nish on the dryer.
2. Install rubber pads to dryer base.
• Locate the 4 rubber pads in the parts package. Insert the
• Purchase the stacking-kit package additionally.
3. Set the dryer upright.
The stacking kit can only be installed for Samsung family
products.
CAUTION
4. Install bracket to dryer.
• Remove washer top cap screw from the rear left. Align left
• Repeat the above step with the right side.
DV90H8000HW-03407A-04_EN_150706.indd Sec3:17 DV90H8000HW-03407A-04_EN_150706.indd Sec3:17
rubber pads into the holes at the bottom of the levelling legs.
bracket holes with top cap screw hole on rear left of the unit
and replace screw.
Leave screw loose so dryer hole alignment will be easier.
English - 17
Bracket-Stacking
Screw
2015-07-06 2015-07-06 3:18:43 3:18:43