Setting Up For A Session; Listening Environment; Channel Configuration/Planning; Power-Up Procedure - Mackie Digital 8Bus D8B v5.1 Owner's Manual

This section of the Digital 8•Bus Owner's
Manual provides very application-specific descrip-
tions of some common usages. Follow the check-
list format to help ensure everything is set just
right for your configuration.
As your skills and knowledge increase, try
new techniques. Build a system that's optimized
for your specific application.
In any serious recording or live audio situa-
tion, the listening environment is one of the most
important considerations. In a recording applica-
tion, be sure the Digital 8•Bus is connected to
excellent reference monitors, like the Mackie
HR824's. In addition, set up the system in an
acoustically controlled and balanced environment.
Avoid a control room with identical dimensions in
any direction and set it up with a good mixture of
absorption and reflection.
In a live-sound setting, place the console out
in the house at a good visual and auditory vantage
point. If you're mixing in mono, it's okay to sit in
line with one of the speaker clusters. When
mixing in stereo or surround, select the best
location—typically called the "sweet spot"—to
critically assess the entire mix. Eliminate guess
work. Maximize efficiency.
Follow this procedure for a safe and sure startup routine. Deliberate, well-thought-out procedures help eliminate
uncomfortable pauses in a session. They make recording a more enjoyable experience.
Amp or Powered
Monitors Off
OR
Connect Instruments
and Microphones
Master L/R
Fader Down
Console
Power On
Synth
This actually has a lot to do with how well any
audio experience unfolds. If you know where
you're headed with track expectations and instru-
mentation, you'll be able to make better choices
along the way. Plan; plan again; think about it;
then, plan some more.
Use the Track Sheet (Ctrl+T) to plan your
session before you begin recording. You'll know
more about how to get where you want to be.
A well-thought-out power-up procedure saves
wear and tear on all your gear. This procedure
helps minimize the opportunity for equipment
damage while maximizing the chance of success.
Refer to Figure 4-1 for a Fast Track Graphic
representation of this procedure.
❏
❏
❏
• The D8B will create a Startup file with default
settings if the User-Set Template has not yet
been specified.
❏
Select A starting Snapshot or
Open Your Master Template
Set Sample
Clock
Amp or Powered
Monitors On
OR