Lenovo ThinkPad X200 Hardware Maintenance Manual page 110

Table 24. Removal steps of system board, DC-in connector, fan, and ExpressCard slot assembly for ThinkPad X200,
X201, and X201i (continued)
Turn the system board over, and then disconnect the DC-in connector and the fan connector from the system board.
When installing:
Make sure that the DC-in connector and the fan connector are attached to the system board firmly.
Step Screw (quantity)
5
M2 × 3.5 mm, flat-head, nylon-coated (1)
104
Hardware Maintenance Manual
Downloaded from LpManual.com Manuals
2
3
4
4
6
4
5
Color Torque
Silver 0.181 Nm
(1.85 kgf-cm)