TP-Link TL-WR740N User Manual page 21

The router provides Auto-Detect function and supports five popular ways PPPoE, Dynamic IP,
Static IP, L2TP and PPTP to connect to the Internet. It's recommended that you make use of the
Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you can
select the very type and click Next to go on configuring.
If you select Auto-Detect, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is successfully
detected by the router.
a) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-7. Please select to clone the MAC address or not, according to your situation.
b) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-8. Configure the following parameters and then click Next to continue.
TL-WR740N/TL-WR741ND
Figure 3-6 Choose WAN Connection Type
Figure 3-7 Quick Setup – MAC Clone
11
150Mbps Wireless N Router