Advertisement
1. Engage AUTO TOUCH.
2. Engage ALL, disengage
BYPASS, and send
timecode to the console –
the POSITION readout changes to show time code is
being received.
3. Move a parameter or recall a patch (user or factory
preset).
Subsequent edits to any recorded automation moves may be
performed in the Mix Editor. Enable the channel view by clicking
the Channel View button, then choose the plug-in you wish to
view from the page pull-down
menu. This displays a list of
available channel and plug-in
automation tracks on a
parameter basis.
Use the Event Automation Track, available under the
♦
Window Menu as 'Event Track', to load plug-in user
(previously stored) or factory preset patches at a
specific time during automation playback.
On The Console
Advertisement
