Advertisement
Preset Toggle
Input Select
Preset Title
Close Button
Memory B
Analyze
Morph Rate
Menu
EQ
Morph
Memory A
Enable
The EQ selection button toggles the graphic EQ in and out of
view via the mouse. Clicking the EQ button when the analyzer is
not activated shrinks the EQ GUI to a condensed yet functional
screen that can access and modify EQ curve settings, change
between Mem A and B, and access the Menu functions.
The Analyze select button activates the analyzer drop panel,
which is not visible when the plug-in is first activated. Clicking
the EQ button off when the full screen is active brings up the
Analyzer panel only. Clicking the Analyze button brings up the
Analyzer panel. (More on this in the next section.)
The Morph button activates a morph sequence that gradually
changes an EQ curve from the Mem A setting to the Mem B
setting, or vice versa.
The Morph rate is measured in milliseconds and varies from 0 to
4000ms (four seconds). You can adjust the rate using the mouse
cursor to drag the values up or down. This timing setting
determines how long the Morph sequence takes to change between
Mem A and Mem B.
Pressing the Menu button opens a pull-down menu that performs
familiar functions such as load, save as, cut, copy, and paste.
The Mem A and Mem B buttons temporarily store EQ settings to
allow comparative referencing. You can also copy and paste
settings from one memory location to another.
Advertisement
