Mackie HDR 24/96 Technical Reference page 79

HD24/96 Technical Reference
Time Code Rate
Bit Depth (next
page [>])(->)
Generate SMPTE
(next page [>])
Generate MTC
(next page [>])
TC Offset (next
page [>])
<< >> Selects the time code frame rate: 30, 29.97, 25,
and 24 frames/second, with choices of drop frame
or non-drop frame for 30 and 29.97 FPS.
OK Confirms the selection and returns to the SYNC
OPTIONS menu
<< >>
Selects between 16-bit and 24-bit recording
<< >>OK Selects between 16-bit and 24-bit recording
Confirms the selection and returns to the SYNC
OPTIONS menu
OK Confirms the selection and returns to the SYNC
OPTIONS menu
<< >> Turns the SMPTE time code output On or Off.
NOTE: You cannot simultaneously generate and
chase to SMPTE. Setting this option On when the
HDR24/96 is set to TC CHASE will result in a "You
can't do that" message.
OK Confirms the selection and returns to the SYNC
OPTIONS menu
(Off to the right. Accessed with the -> button)
<< >> Turns MIDI time code output On or Off
OK Confirms the selection and returns to the SYNC
OPTIONS menu
Active only when chasing time code. When Offset is other than
zero, the transport current time is equal to the incoming time code
value plus the TC Offset value.
Set
<< >>
Zero
Moves the vv cursor over the hour,
minute, second, or frame field. Use the
(-)DEC and (+)INC buttons to
decrement or incrementchange the
value.
Sets the time code offset to 00:00:00:00
79