Setting up for wireless operation
MAC OS users
Instead of installing the software on your MACINTOSH computer, open the
Configuration Web page right from your browser and start setting up access to Web
content and customizing your frame from your computer (see
1 Make sure the frame is connected to your wireless network
computer is connected to the Internet.
2 On the frame, tap Home
3 Retrieve the IP address (format: XXX.XXX.X.XXX) from the frame's Network
Settings screen.
4 Open a browser (for example, INTERNET EXPLORER, MOZILLA FIREFOX, SAFARI,
etc.) on your computer.
5 Enter the IP address in the browser's address window, then press Enter.
The KODAK Displays and Devices Configuration page opens in your browser.
6 Go to step
7
on
12
→
Enter the IP address here
page 11
to start configuring your frame.
→
Settings
www.kodak.com/go/support
page
10).
(page
5) and your
Network, then tap Select.