Kodak EASYSHARE W820 Extended User Manual page 13

The person who set up your network can help you with this information. Or, tap
Back then tap Help me connect for more information.
2 With your home network highlighted, tap OK to connect to your home network.
The Connecting (or the wireless network security screen, if enabled) appears.
Or, tap Exit to go to the Home screen without connecting. (See
Enter security key (if you have wireless network security enabled)
You are prompted to enter your security key (WEP or WPA) using the on-screen
keyboard. Slide along the bottom of the touch border (or tap below the slider
arrows) to highlight a character then tap
Tap Done when finished.
Text box
If you do not have security enabled, go to step 3. (We recommend that you
enable your network security to prevent others from accessing your wireless home
network.)
NOTE: The screen identifies your security as either WEP or WPA
www.kodak.com/go/support
Slider
Slider arrows
Setting up for wireless operation
(Select) to enter it in the text box.
Backspace - erases text
Done
Touch tips
Right border - tap only
On the bottom border, keep
sliding (or tapping slider
arrows) left/right to go to the
previous or next row.
Select
page 25.)
7