Location Of User's Control - Sharp 27U-S610 Service Manual

27U-S610
Front Panel
POWER
→
Press On.
→
Press again Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
→
Press Accesses MAIN MENU.
→
Press again Exits MAIN MENU.
Basic Remote Control Functions
POWER
→
Press On.
→
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
→
Press Accesses MAIN MENU.
→
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.

LOCATION OF USER'S CONTROL

POWER
TV
FLASHBACK
A
VOL
—
MENU
REW
PAUSE
PIP
SWAP
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Infrared Transmitter Window
DISPLAY
Press
four seconds.
DVD
VCR DISPLAY INPUT
Press again
• Temporarily displays receiving
channel when in Closed Caption
1 2 3
mode.
4 5 6
INPUT
Press
7 8 9
INPUT 1 mode.
ENTER
Press 2 times
0 100
INPUT 2 mode.
PERSONAL PREFERENCE
Press 3 times
B C D
INPUT 3 mode or COMPONENT mode.
Press 4 times
CH
VOL
original TV mode.
+
CH
MUTE
ENTER
CATV TV
Used in some instances where a Cable
Converter Box requires an "enter"
DVD VCR
command after selecting channels,
when using the REMOTE KEYPAD
PLAY FF
button.
CH/SKIP
STOP REC
CHANNEL UP/DOWN
(') Selects next higher channel.
(") Selects next lower channel.
FREEZE MOVE SELECT
• Moves the "
screens.
TV • CATV • VCR • DVD
MUTE
Press
Press again
• CLOSED CAPTION appears when
sound is muted.
PIP FUNCTION
With the VIDEO inputs, you can watch
two pictures at the same time.
4
VIDEO IN 2 L-AUDIO-R
(INSIDE DOOR)
CHANNEL UP/DOWN
( ) Selects next higher
channel.
( ) Selects next lower
channel.
• Press both at the same
time to access the MAIN
MENU screen.
→
Displays receiving channel for
→
Removes display.
→
Switch to external video
→
Switch to external video
→
Switch to external video
→
Switch back to the
»
" mark of the MENU
→
Mutes sound.
→
Restores sound.