Advertisement
EVX-Link
FAQs
Will the EVX-Link support both Time Slots (T1 & T2 ) at the same
time via the EVX-5400 Mobile, if not the we will have to use 2
Radios and 2 EVX-Links to support the 2 time slots, and to make
it connect at both ends we will need 4 x Mobile and 4 x EVX-Links.
This will be expensive to do and possible of Interferences
between the 2 mobiles on the same frequencies to use both
time slots in DMR Mode.
The EVX-Link only supports one time slot (T1 or T2) at same time.
This is same as normal mobile channel setting.
Point 10 in the FAQ Doc is the UDP port locked to 21000, or will it
have a selectable UDP Range. They understand that the same
UDP must be used in the Network they want to build.
No, the EVX-Link cannot change the UDP port.
Does the display on the EVX-5400 mobile identify the PTT-ID of
the transmitting radio?
No, the mobile operates differently from other EVX mobiles when
interfacing with the EVX-Link. The display functionality is limited
and will not show any Receive information.
VERTEX STANDARD is a trademark of Vertex Standard LMR, Inc. All other trademarks are the property of their respective owners. © 2015 Vertex Standard LMR, Inc. 08/2015
www.vertexstandard.com / everge.vertexstandard.com
Can the mobiles that are set up to interface with the EVX-Link
communicate directly with each other through the EVX-Link
connection?
No, they only receive and rebroadcast transmissions from
subscribers active on each site. They cannot transmit directly
through the EVX-Link.
Is the Microphone on the mobile functional?
No, the Microphone is inoperable when the mobile is in EVX-Link
interface mode.
Advertisement
