Chevrolet Cruze Owner's Manual page 260

258 Vehicle care
5. Rotate bulb holder anti-clockwise.
6. Remove bulb holder. Push bulb
into socket slightly, rotate anti-
clockwise, remove and renew
bulb.
7. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and
engage.
8. Switch on ignition, operate and
check all lights.
Light assembly in the tailgate
Rear fog light/Reverse light,
depending on the side.
1. Remove the boot lid panelling.
2. Rotate bulb holder anti-clockwise.
3. Remove bulb holder. Push bulb
into socket slightly, rotate anti-
clockwise, remove and renew
bulb.
4. Insert bulb holder into boot lid.
Refit the inner panelling to boot
lid.
5. Switch on ignition, operate and
check the lights.