KVH Industries TVR6 User Manual page 81

Manual Switching
If you prefer, you can switch satellites manually from
the Sat Select menu.
Follow the steps below to manually switch to a
different satellite.
1. Using the primary receiver, press the MENU
button to access the main menu.
2. Highlight the System Setup tab and press
SELECT.
3. Highlight the Antenna tab.
4. Highlight the Sat Select button and press
SELECT.
5. Highlight the Go to Sat selection for the desired
satellite and press SELECT. For example, to switch
to the 119 satellite, highlight Go to Sat 119 and press
SELECT.
The antenna enters Manual mode and begins tracking
the selected satellite.
54-0376
Sat Select – Manual
Antenna
Antenna Controls
Antenna Settings
Current Settings
Diagnostics
Cancel
Model ID
Go to Sat 101
Model
Go to Sat 119
Version
Tuning Delay
Go to Sat 110
Antenna Capabilities
Go to Sat 72.5
Auto Switch
Antenna
When you manually select a satellite, the
system enters Manual mode. To restore
automatic switching, you need to select
"Auto Switch" from the Sat Select menu.
Antenna Controls
Modify Settings
Sat Select
: 1
: TVR6
: 1.4
: 0
: Multisat
Two-way
9.9