Operations - Williams OVERTURE 2 Owner's Manual

OPERATIONS

The Overture 2 has an LCD that allows you to
see the Voice name as well as its parameters.
Most of the front panel buttons are very straight
forward and easy to select for general functions.
In cases where you want to edit settings in
more depth you will need to use the front panel
buttons as well as the Function button and
Value knob to change parameters.
Powering On the Overture 2
Press the POWER button in the upper left
corner of the front panel. This product has a
power standby mode. If the piano turns off
while you are not playing it, this is likely due to
the Power mode being set to Auto Power off.
To correct, press the Function Button, then turn
the Value Dial to "Auto Power" and set to "Off."
Metronome Function
Press the Metronome button to turn on the
metronome. The LED will light. You will hear the
click in headphones or speakers.
Press the Metronome button again to exit
metronome function. The LED will turn off.
To Change Metronome Time Signature
1. Press and hold the Metronome button for
2 seconds. The LCD display will show the
current metronome signature setting and
then go back to current Voice name.
2. Turn the Value Knob to determine the Metro
time signature while the display shows the
current setting.
The default is 4/4 and the following options are
available to toggle through: 2/4, 3/4, 4/4, 5/4,
6/8, 9/8, and 12/8.
8
You can also change the Metronome time
signature with the Function Mode.
1. Press the Function button.
2. Turn the Value Dial to select Metronome
signature edit menu. The display will show
"Time Sig".
3. Press the Function button again to enter
the relative parameter edit menu, and the
parameter will blink to indicate the parameter
is editable.
4. Turn the Value Dial to select a time signature.
Time Sig
To Set The Volume Level Of The Metronome
1. Press the Function button.
2. Turn the Value Dial to select the Metronome
Volume edit menu. The display will show
"MetroVol".
3. Press the Function button again to enter
the relative parameter edit menu, and the
parameter will blink to indicate the parameter
is editable.
4. Turn the Value Dial to select the Metronome
Volume range (0-127).
MetroVol
O W N E R ' S MAN UAL