Tuning; Effects - Williams OVERTURE 2 Owner's Manual

OVE RTU R E 2 D I G ITAL P IAN O
the right section becomes F2-C6. The voice of
the two sections is the same.
In this mode, the right pedal becomes the
sustain pedal for the right section of the
keyboard and the left pedal becomes the
sustain pedal for the left section of the
keyboard. The middle pedal is disabled. This
mode is ideal for teacher/student practices.
Press the DUET button and its indicator lights
up to show that the DUET mode is engaged.
Use the voice buttons or the value dial to select
the voice.
Press the DUET button again to exit the duet
keyboard mode. The indicator will turn off.

TUNING

To Change Global Tuning
1. Press the Function button.
2. Turn the Value Dial to select the Tune edit
menu. The display will show "Tune a1".
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Tuning.
(415Hz to +466Hz)
Tune a1

EFFECTS

The Reverb and Chorus effects may be applied
to each voice individually and will be retained
even when the power is turned off.
To apply either effect, press either button. The
button will light and the effect will be heard
when the piano is played.
W ILLIAM S P IAN OS. CO M
To turn off the effect press the button of the
desired effect again and the LED light will go off.
Reverb and Chorus settings are set per
Instrument and will be retained even when the
power is turned off.
Reverb
To change the reverb type:
1. Press the Function button.
2. Turn the Value Dial to select Reverb Type edit
menu, the display will show "Rev .Type".
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Reverb type.
(OFF and R1 to R8)
Type # Type
Name
R1 Hall1
R2 Hall2
R3 Room1
R4 Room2
To Change Reverb Depth
1. Press and hold the Reverb button, the
display will show current depth of the reverb
and then return to the current Voice after
about 5 seconds.
2. You can turn the Value Dial to select the
depth range. (0-127)
You can also change the Reverb depth with the
Function button:
1. Press the Function button.
2. Turn the Value Dial to select the Reverb depth
edit menu. The display will show "R .Depth".
Type # Type
Name
R5 Room3
R6 Stage1
R7 Stage2
R8 Plate
13