Preparing To Use The Monitor; Using The Monitor Attached To The Arm Cuff; Using As A Tabletop Monitor - Lumiscope 1095 Instruction Manual

The 1095 can be used either attached to the cuff or as a table-
top monitor with the enclosed airtube attachment.

Preparing to Use the Monitor

Using the Monitor Attached to the Arm Cuff

• Angle the bottom of the monitor against the
raised part of the plastic piece on the cuff
(fig. A).
• Line up the holes on the back of the monitor
with the pegs on the plastic piece of the
cuff.
• Push the monitor onto the cuffand make
sure it is securely fastened.
• Now you can use the monitor while it is
attached to the cuff (fig. B).

Using as a Tabletop Monitor

• To release the monitor from the cuff, press
and hold the release button on top of the
monitor and pull the monitor away from the
cuff.
• Connect the monitor end of the air tube to
the holes on the back of the monitor (fig. C).
• Connect the cuff end of the air tube to the
peg on the plastic piece of the cuff (fig. D).
Push the connection into the cuff until you
hear a clicking sound.
• Now you can use the monitor as a desk-
top unit (fig. E).
NOTE: To detach the air tube from the main
unit, simply press and hold the release
button while pulling the tube connection
away from the unit.
Fig. B
Realease
Button
Fig.C
5
Fig. A
Peg
Peg
Fig. D
Fig. E