General Mounting - LG 60PY2DR Training Manual

INSTALLATION

GENERAL MOUNTING

The chart below gives screw sizes needed to mount our plasma units to most wall mounts. The
design of the mount may require longer or shorter screws than the length indicated below. Lengh is
in the far right column. Use 25mm screws for the 42" and 50" plasma models and 15mm for the 60"
models. This is subject to change without notice. Some units require spacers between the mount and
the unit, this also varies by cabinet design.
Nominal Nominal
Diameter Diameter Pitch Pitch
d = D d = D P P
M 5.00 M 5.00 0.8 0.8
M 5.00 M 5.00 0.8 0.8
Plasma Training
Root Root Pitch Pitch
Radius Radius Diameter Diameter
r r d2=D2 d2=D2
0.115 0.115 4.48 4.48
0.115 0.115 4.48 4.48
Minor Minor Thread Thread
Diameter Diameter Height Height
d3 d3 D1 D1 h3 h3
4.019 4.019 4.13 4.13 0.491 0.491
4.019 4.019 4.13 4.13 0.491 0.491
14
Drill Drill
Diameter Diameter Length Length
H1 H1 mm mm mm mm
0.4 0.4 4.2 4.2 25 25
0.4 0.4 4.2 4.2 15 15
Installation