Table of Contents
Advertisement
[Input]
[Settings] > [Input]
•
[Input List]: Selects the input mode.
PBP/PIP Connection
HDMI 1
HDMI 2
Main Screen
DisplayPort
USB-C
•
[Aspect Ratio]: Adjusts the aspect ratio of the screen. The display may look the same for [Full Wide],
[Original], and [Just Scan] options at the recommended resolution.
- [Full Wide]: Displays the video in widescreen, regardless of the video signal input.
- [Original]: Displays video according to the aspect ratio of the video signal input.
- [Just Scan]: The aspect ratio is not adjusted from the original.
- [Cinema 1]: Enlarges the screen with an aspect ratio of 21:9.
- [Cinema 2]: Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for
subtitles.
•
[Auto Input Switch]: When [Auto Input Switch] is set to [On], display will automatically switch to new input
when connected.
•
[PBP / PIP]: Displays the screens of two input modes on one monitor.
•
[PIP Size]: Changes the size of the PIP sub-screen.
•
[PIP Position]: Changes the position of the PIP sub-screen.
•
[Screen Switch]: Switch the main screen/sub-screen in PBP/PIP mode.
•
[Sound Switch]: Switch the main screen/sub-screen sound in PBP/PIP mode.
NOTE
•
If not using the [PBP / PIP] feature, [PIP Size], [PIP Position], [Screen Switch] and [Sound Switch] are
deactivated.
•
Some features and HDR functions are not supported in PBP/ PIP mode.
18
Sub Screen
HDMI 1
HDMI 2
DisplayPort
USB-C
-
o
o
o
-
o
o
o
-
o
o
o
[General]
[Settings] > [General]
•
[Language]: Sets the menu screen to the desired language.
•
[OLED Screen Move]: Moving the screen minutely at regular intervals helps to prevent panel noise caused by
images that have been fixed for a long time.
•
[OLED Screen Saver]: If there is no movement on the screen for a certain period of time, the screen turns off
automatically.
o
•
[OLED Image Cleaning]: Corrects screen problems that may occur when the monitor is turned on for a long
o
time. This will take approximately 10 minutes to complete.
o
It is automatically executed when entering power saving mode or turning off the power after more than 4
-
hours of use from the previous [OLED Image Cleaning] completion.
•
[USB-C Option]: Set the USB-C settings to be optimized for screen resolution or USB data rate.
•
[Hexagon Lighting]: Sets the lighting on the back of the monitor.
- [Static 1], [Static 2], [Static 3], [Static 4]: Sets the lighting to the desired color.
- [Cycling]: All colors appear alternately.
- [Off]: Turns off the light on the back of the monitor.
•
[User-defined Key 1]/[User-defined Key 2]: You can customise the main menu to access your preferred menu
easily. [User-defined Key 1] and [User-defined Key 2] appear at the left/right of the main menu.
Advertisement
Table of Contents
