Insignia NS-32D420NA16 User Manual page 54

NS-32D420NA16 Insignia 32" 1080p 60Hz LED TV
A If you select Cable/Satellite Box, the screen
that opens shows you all the ways you can
connect a box to your TV.
Press ENTER. When a message appears telling
you setup is complete, press EXIT to close the
menu.
Press INPUT to open the INPUT SOURCE list,
then press
source you connected your TV to and press
ENTER. Your TV switches to the input source
you selected.
B If you select Cable from the wall, your TV
scans for available channels. The scan may take
several minutes.
When the scan is complete, the on-screen
menu closes and your TV tunes to the first
channel it found when scanning.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
or to select the video input
www.insigniaproducts.com
C If you select Antenna, your TV scans for
available channels. The scan may take several
minutes.
When the scan is complete, the on-screen
menu closes and your TV tunes to the first
channel it found when scanning.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
49