Power On / Off
1
2
2
Power Indicator
LED Indicator
Standby : Red
On
: No Light
12
Ofrecido por www.electromanuales.com
Remote control
signal sensor
C.A.T.S. sensor
Plasma C.A.T.S. (Contrast Automatic Tracking System)
Plasma C.A.T.S. automatically senses the ambient light conditions and
adjusts the brightness and gradation accordingly, to optimise contrast.
(Effective when Viewing mode is set to Auto.)
1
1
Connect the mains lead to the Plasma TV.
2
Connect the mains plug to the wall socket.
Press the
switch on the TV set to turn
the set on.
Owner ID setting screen is displayed. See
page 22.
To switch the TV set to Standby mode, press
the
button on the remote control.
The TV set can be switched on by pressing
the
button again if it was switched to
Standby mode.
Note:
This TV will still consume some power as long
as the mains plug is still inserted into the wall
socket.
OK
N
1
2
3
4
5
6
7
8
9
C
0
TV