Cadillac SRX 2011 Owner's Manual page 317

How the System Works
When the vehicle is shifted into
R (Reverse) the front and rear
sensors are automatically turned
on. After the vehicle is shifted out
of R (Reverse), the rear sensors
are turned off and the front sensors
stay on until the vehicle is above a
certain speed. The front sensors
may also be turned on by pressing
the park assist button located next
to the shift lever without shifting
into R (Reverse) while the vehicle
is traveling at a low speed. See
Turning the System On and Off
later in this section.
When the vehicle is in N (Neutral),
the system may be active. If the
vehicle is in a car wash, the sensors
may detect objects in the car wash.
See Turning the System On and
Off later in this section to turn the
system off.
High-toned beeps heard from
the front speakers are for objects
detected near the front bumper.
Low-toned beeps heard from the
rear speakers are for objects
detected near the rear bumper.
When an object is detected, high or
low tone beeps are heard. As the
vehicle gets closer to an object, the
time between the beeps becomes
shorter. When the distance is less
than 30 cm (11.8 in), beeping is
continuous. The distance may
be less during warmer or humid
weather.
PARK ASSIST OFF displays on
the Driver Information Center (DIC)
to indicate that UFRPA is off.
The message disappears after
a short period of time.
I n f o r ma t i o n P r o v i d e d b y :
Driving and Operating
Front Display
The front display is located in the
instrument panel in the center of
the speedometer and has four bars
to provide distance and system
information.
9-41