Variable Speed Control; Emptying The Dustbag; Maintenance; Switching On And Off - Black & Decker KA274E User Manual

ENGLISH
•
Injuries caused by touching any
rotating/moving parts.
•
Injuries caused when changing any parts,
blades or accessories.
•
Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
•
Impairment of hearing.
•
Health hazards caused by breathing dust
developed when using your tool (example:-
working with wood, especially oak, beech
and MDF.)
Use
Warning! Let the tool work at its own pace. Do
not overload.

Variable speed control

The variable speed control allows you to adapt
the speed of the tool to the workpiece material.
•
Set the control knob (6) to the desired
setting. Use a high speed for wood, medium
speed for veneer and synthetics and low
speed for acrylic glass, non-ferrous metals
and for removing paints.

Switching on and off

•
To switch the tool on, press the on/off switch
(1).
•
For continuous operation, press the lock-on
button (2) and release the on/off switch.
•
To switch the tool off, release the on/off
switch. To switch the tool off when in
continuous operation, press the on/off switch
once more and release it.
8

Emptying the dustbag

The dustbag should be emptied every 10
minutes.
•
Shake the dustbag to empty the contents.
Hints for optimum use (fig. D)
•
Always hold the tool with both hands.
•
Do not exert too much pressure on the tool.
•
Regularly check the condition of the sanding
sheet. Replace when necessary.
•
Always sand with the grain of the wood.
•
When sanding new layers of paint before
applying another layer, use extra fine grit.
•
On very uneven surfaces, or when removing
layers of paint, start with a coarse grit. On
other surfaces, start with a medium grit. In
both cases, gradually change to a fine grit for
a smooth finish.
•
Consult your retailer for more information on
available accessories.

Maintenance

Your tool has been designed to operate over a
long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
•
Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
•
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.