print head
print head holder
Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
• Be sure to remove the clear film from the ink tank in the exact order as shown in step 2.
6
Remove the protective cap from the
print head.
• Do not touch the print
head nozzles or
electrical contacts.
• Do not attempt to
reattach the protective
cap once it has been
removed.
7
Place the print head in the holder.
Be careful not to touch any parts inside the printer.
8
Lock the print head into place by
lowering the lever.
Do not touch the lock lever once the print head has been
installed.
1
Take out the yellow ink tank.
2
Pull the orange tape in the direction of
the arrow and remove the clear film.
print head
electrical
nozzles
contacts
5