LG MFL66100447 Owner's Manual page 52

52
CUSTOMIZING SETTINGS
Advanced image options (Depending on model)
Setting
Colour Gamut Advanced Control
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Expert Control
Displays colour domain of the signal.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
EBU: Mode to display EBU standard colour area.
SMPTE: Mode to display SMPTE standard colour area.
BT709: Mode to display BT709 standard colour area.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
xvYCC *This feature is not available for all models.
(available in Cinema This is produces richer colours.
and Expert mode) This feature represents rich colours as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Colour Filter This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
(available in Expert This function is enabled in "Picture Mode - Expert" when you watch DTV.
modes)
Colour Temperature Adjusts the overall colour of the screen by changing the white baseline.
a. Method : 2 Points
Pattern: Inner, Outer
y
Red/Green/Blue Contrast, Red/
y
Green/Blue Brightness: The ad-
justment range is -50 to +50.
Colour Management As the tool used by the experts to make adjustments by using the test patterns, this does not
System affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Yellow/Cyan/Magenta).
Colour difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
This feature is disable in RGB-PC and HDMI-PC mode.
Description
b. Method : 10 Point IRE
Pattern: Inner, Outer
y
IRE (Institute of Radio Engineers) is the unit to
y
display the size of the video signal and can be set
among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
Luminance: This function displays calculated lumi-
y
nance value for 2.2 gamma. You can input lumi-
nance value you want at 100 IRE, than the target
luminance value for 2.2 gamma is displayed at every
10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 - +50.
y
c. Apply to all inputs