Table of Contents
Advertisement
12
ASSEMBLING AND PREPARING
Not using the Desk Type Stand
Image shown may differ from your TV.
y
Only 26/32LK33**, 32/37/42/47LK45**
1
Push the supplied protection cover into the
opening at the bottom of the TV until clicking
sound.
Protection cover
Mounting on a table
Image shown may differ from your TV.
y
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
y
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
When adjusting the angle of the product,
y
watch out for your fingers.
Securing the TV to a table
Image shown may differ from your TV.
y
This feature is not available for all models.
y
Only 26/32LK33**, 32/37/42LK45**, 32/37LV35**
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
1 0 c m
10 cm
y
20
CAUTION
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
20
Advertisement
Table of Contents
