Before You Clean; Cleaning Hard Floors - Bissell POWERSTEAM BGST1566 SERIES User Manual

Operations

Before you clean

Thoroughly sweep or vacuum floor prior to
cleaning with the steam mop.

Cleaning hard floors

Your steam mop is designed to clean hard floor-
ing such as ceramic tile, vinyl, laminate, marble,
stone and sealed hard wood floors. Use of your
steam mop on waxed or some unwaxed floors
may result in a diminished glossiness. The steam
mop is not for use on unsealed wood floors. For
best results test in an inconspicuous area and
check the care instructions from your flooring
manufacturer.
1. Plug the unit in and wait 30 seconds for it to
heat up. Choose the level of steam to clean your
floor: Low (delicate floors), Medium (regular
cleaning), High (durable floors or sticky messes).
Begin cleaning by slowly passing the unit over
the floor surface.
2. To sanitize an area of your floor, (attack
invisible germs and bacteria) place the steam
mop over the spot for a minimum 15 seconds
using continuous steam, but no longer than
20 seconds using continuous steam. For larger
areas, overlap swivel head placement.
3. To thoroughly clean dried-on sticky spots
place the scrubby pad on the steam mop. Then
press and lock the Easy Scrubber brush into
place and slowly move the brush over the sticky
spot to remove.
4. To turn off the steam mop, continue to press
the Steam Level button until the blue light is
illuminated above the Steam Level button.
5. When the steam mop stops emitting steam,
unplug the unit. Simply remove the water tank,
refill, and continue steaming.
www.bissellcommercial.com
8
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
WARNING
Tinted plates on foot may get hot while steam mop is
in use. Do not touch while hot.