Voice Control - Sony Ericsson tm 506 User Manual

TM506_Bella_UG_Generic_P1C.book Page 29 Wednesday, March 3, 2010 11:59 AM

Voice control

By creating voice commands you can:
• Voice dial – call someone by saying
their name
• Answer and reject calls when you
use a handsfree
To record a voice command using
voice dialling
1 From standby select
> the General tab >
> Voice dialling > Activate.
2 Select Yes > New voice command
select a contact. If the contact has more
than one number, select the number to
add the voice command to.
3 Record a voice command such as
"John mobile".
4 Follow the instructions that appear. Wait
for the tone and say the command to
record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes.
If not, select No and repeat steps 3
and 4.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
Menu > Settings
Voice control
and
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example "John mobile". The
name is played back to you and the
call is connected.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select
> the General tab >
> Voice answer > Activate.
2 Follow the instructions that appear and
select Cont. Wait for the tone and say
"Answer", or another word.
3 Select Yes to accept or
recording.
4 Follow the instructions that appear and
select Cont. Wait for the tone and say
"Busy", or another word.
5 Select Yes to accept or
recording.
Menu > Settings
Voice control
No for a new
No for a new
Calling 29